Furniture Repair: Where to Start?

Who doesn’t love a well-furnished house? Surely, no one. You can easily furnish your house with antique/trendy furniture. However, when it comes to maintaining furniture, it really seems to be a Herculean task.

Furniture is very useful in our daily lives. From chairs and tables to doors, windows, beds and wardrobes, everything comes under furniture. They are mostly built out of wood, metal, glass or stone, with a handful of exceptions. Besides, all of them have their own ways of maintenance. So, it certainly takes time and a bit of research to care for them. Only then can you hope them to stay as you want them to be.

While you can take care of some of your furniture without any assistance, for the others, you perhaps need a bit of knowledge. Thus, here we bring you some hacks for certain conditions. So, keep following below. 

Some Furniture Conditions and How You Can Fix Them!

Whether the rungs of your chairs are loosening, or the tables are becoming wobbly, you need not worry a bit. So, here is a list of conditions of your furniture where you can just keep your calm and restore them effortlessly.

If the Rungs of Your Chair Gets Loose

With years of toppling and tumbling, the joints of the chairs become loose. You can see it happening quite common in most of your Furniture Repair Maryland. However, you can simply glue them in order to restore them.

First, you need to remove the previous glue that is wearing out. Then, you have to sand them out clean. Next, put some wood glue into the opening of the leg. You can do this with the help of a syringe for precision. Lastly, clamp the rung tight and wait till the wood glue completely dries off. Now, you can use the chair as you need to.

If your Chairs/Tables Wobbles

Some accidents are as dangerous as falling from an imbalanced chair. Wobbly chairs and tables are pretty common. They are also tremendously unnerving at the same time.

Right at the beginning, you can simply try and fix the loose legs and joints of the furniture, in case they are loose. However, if that isn’t the case, then you need to add braces. You can buy right angled corner braces at your local hardware store. The braces are generally inexpensive things. One you have them, you can easily add them between the legs and the seat/top.

If the Corners of your Drawers Break Apart

Drawers are mostly made out of cheap/thin wood and thus, wear out pretty easily. They are so thin and fragile that even hammering or drilling a hole can make them crack or break. The same happens most often in case of the corners of the drawers.

In this case, first pull out the ills, of there are any, then, sand out the remaining glue on the surface. Next, apply glue to the broken part and attach it to the other half. Wait until the glue dies out completely and then you can reuse your drawers just as you did before.